Preliminary results of pest control in the agricultural field

[ China Agricultural Machinery Industry News ] Agricultural drones have completely surpassed manual operations in spraying pesticides. The rate and amount of spraying are also an important reason why drones are gradually receiving high praise from agricultural practitioners. It is reported that around the field of agricultural drones, dozens of domestic enterprises have invested hundreds of drones to assist in agricultural operations, and have achieved initial results in the field of radical pest control. The daily average operating area is expanding by 100,000 mu.

Preliminary results of pest control in the agricultural field
Compared with foreign data, drones in Japan and other countries have been engaged in agriculture for decades, while domestic drones are less than one in a thousand. Domestic news on artificial spraying of pesticide poisoning has emerged in an endless stream, while drone spraying effectively solves the pain points and greatly reduces the risk of manual administration. In addition, manual spraying is difficult to control the problem of excessive pesticide residues.
The implementation of scientific and rational drug use at the national level has become a need for agricultural transformation. To this end, the introduction of drones into the agricultural sector has become an important criterion for the improvement of modern agricultural levels, and many provinces have begun to take action. For example, Jiangxi and other provinces directly include drones into the scope of agricultural machinery subsidies or start pilot subsidies to farmers, encouraging the purchase and use of drones.
However, there are many pain points in the domestic agricultural drones such as the need to improve the application of pesticides, the short-board of the UAV technology, the obstacle avoidance at night and the difficulty of operation.
In addition, domestic UAV technical barriers are still very high, such as flight control, cloud platform, map transmission, obstacles and other core functions are only controlled by a few companies. Therefore, many companies lack core technology or limited research and development capabilities, and may be ruthlessly eliminated by the market.
According to industry insiders, the rise of agricultural drones is related to the low level of traditional agricultural operations. Comparing the cultivated area of ​​farmers with Chinese and foreign farmers, it can be found that the management area of ​​Chinese farmers is far lower than that of Japanese and American farmers.
In order to promote the agricultural drone market, companies such as DJI have adopted leases to encourage farmers to use drone operations. With reference to foreign agriculture, leasing is undoubtedly a good way. Relatively speaking, the price of agricultural drones is high. If the cost of purchasing the farmer alone is high, it will also lead to the difficulty of measuring the idle input and output of the machine. The sharing mode such as leasing can balance the interests of all parties and realize the large utilization of equipment.
In addition, a new industrial chain will be formed around agricultural drones, such as drone maintenance, drone operators and other emerging industry chains.
The practice of Japanese drones in the agricultural field is worth learning from, and Japan has adopted agricultural associations to improve the efficiency of drone use. For example, it is carried out by farmers instead of single-door households. Take the rural areas in southern China as an example. If it is a single-door single-spray, the operating area is too small to push up the cost. If it can achieve concentrated spraying of farmland in large areas, it can also reduce farmers' own purchase of pesticides. Undoubtedly found a new way to solve the problem of pesticide flooding.
(Original title: Domestic agricultural drones can be used for centralized spraying or curing pesticides)

Vermiculite Tile Roll Forming Machine

Stone coated sheet is formed by 0.4mm Al-Zn plating panel and color stones

It is modern,environmental and nice appearance.

We developed this stone coated production line based on long time running and improvement It is high-performance,stable

energy-efficient and easy operation

TECHNICAL SPECIFICATION

5 tons hydraulic un-coiler:

Hydraulic motor drives. One single-head structure. It has a pressing arm to prevent the coil loose.

Electric uncoiling, hydraulic motor tenses the coil inner.

The max. coil inner-diameter is 508mm.

The max. coil outter-diameter is 1200mm.

The max. width of coil is 1250mm.

The max. capacity is 5 tons.

Roll-Forming M/C:

Welded steel structure base, chains transmit, motor drives it. The machine include the filming device .

The roller is designed by Germany software COPRA, and has FEA analysis, which can promise the product precision.

About12 stations to form; Material of Roller: 45#, with hard chrome coated, polishing,

Voltage:380V/50Hz; Line speed: about 3.5 m/min

Hydraulic pressing/ Cutting:

Stop to press, Stop to cut, Post cut .Cutting tool material: Cr12, pressing tool material:40Cr.

Tolerance of the cutting length ±2mm.

Product Rack

It is 2 parts, 6 meters total.

Un-powered.

Hydraulic System:

It offers power for the cutter.

Electrical System:

It uses Siemens PLC system to control the whole line. It can measure and cut the length automatically. Frequency adjusts the speed and it has the self-control speed function.

Human-machine screen, touch screen control. The length can be set in touch screen freely and operation is simple.

The surround connecting wires adopts aviation socket or fast-speed plug.

Safety barrier system

To protect the workers safely when working.

20140412_175145

Vermiculite Tile Roll Forming Machine

Vermiculite Tile Roll Forming Machine,Automatic Profile Rolling Machine,Aluminum Roofing Forming Machine,Stone Coated Tile Making Machine

Botou Xianfa Roll Forming Machine Factory , http://www.rollformingmachinecn.com