The maintenance of the truck crane has to be moderate
After spending more than 100,000 or hundreds of thousands of dollars on buying a new special car, many drivers will be very careful about using their own cars, fearing to ruin some parts of the car. The maintenance of new cars is also particularly frequent, but they do not know that excessive maintenance will also affect special vehicles. Today, Xiaobian mainly discusses the impact of excessive maintenance of the truck crane. First, always think that the more oil the better If the oil is too much, it will increase the internal power loss of the engine, and it will also cause the vehicle to burn oil. Therefore, it should be noted that when adding the oil, do not exceed the oil scale or a little bit below the oil scale. Second, always think that high-grade fuel is good for the engine High-grade fuel is not good for every car. The key is to look at the value of the engine's compression ratio. The engine compression ratio should normally be 93. , And the engine compression ratio of more than ten five should use 97 gasoline. Third, always think that imported tires are durable Experts remind that the road conditions at home and abroad are very different. Imported tires may perform well in foreign countries, but not necessarily on domestic roads. Things suitable for foreign use may not be easy to use in the country. Many people have the feeling of esteem, always feel that everything abroad is good, and some people even choose to buy a small thing abroad. Xiao Bian wants to say that it is not necessary. Now that the quality of domestic products is better, the domestic tires are also easy to use. Editor's Note: Although buying a new car costs a lot of money, it cannot be over-maintained. Too good to maintain is not only a waste of time and money, but also not conducive to the daily use of the car. Drivers can follow the instructions for proper maintenance.
It is a new type of industrial waste gas
Processing Equipment.Widely used in industrial Waste Gas Treatment, early
treatment of dust and other aspects of the purification, the effect is very
good, is currently the most commonly used in the treatment of waste gas of a
practical processing equipment.Our
production of PP washing tower and washing tower existing on the market is
different, it is made of plastic most lightweight polypropylene, which is
produced from PP material,The washing tower of our
production is mainly divided into two types:Packed
tower and swirl tower, packed tower and relatively wide application, when the
exhaust gas in the dust is large, can choose the swirl tower.PP washing tower has the advantages of simple structure, low energy
consumption, high purifying efficiency.
Waste Gas Treatment Equipment,Gas Treatment ,Waste Gas Treatment ,Waste Gas Disposal Shenzhen Xicheng Plastic Co., Ltd. , http://www.china-xicheng.com