The maintenance of the truck crane has to be moderate

After spending more than 100,000 or hundreds of thousands of dollars on buying a new special car, many drivers will be very careful about using their own cars, fearing to ruin some parts of the car. The maintenance of new cars is also particularly frequent, but they do not know that excessive maintenance will also affect special vehicles. Today, Xiaobian mainly discusses the impact of excessive maintenance of the Truck Crane.

1.jpg

First, always think that the more oil the better

If the oil is too much, it will increase the internal power loss of the engine, and it will also cause the vehicle to burn oil. Therefore, it should be noted that when adding the oil, do not exceed the oil scale or a little bit below the oil scale.

Second, always think that high-grade fuel is good for the engine

High-grade fuel is not good for every car. The key is to look at the value of the engine's compression ratio. The engine compression ratio should normally be 93. , And the engine compression ratio of more than ten five should use 97 gasoline.

Third, always think that imported tires are durable

Experts remind that the road conditions at home and abroad are very different. Imported tires may perform well in foreign countries, but not necessarily on domestic roads. Things suitable for foreign use may not be easy to use in the country. Many people have the feeling of esteem, always feel that everything abroad is good, and some people even choose to buy a small thing abroad. Xiao Bian wants to say that it is not necessary. Now that the quality of domestic products is better, the domestic tires are also easy to use.

Editor's Note: Although buying a new car costs a lot of money, it cannot be over-maintained. Too good to maintain is not only a waste of time and money, but also not conducive to the daily use of the car. Drivers can follow the instructions for proper maintenance.


MC is a trustworthy Construction Machinery manufacturer and supplier, and our tower cranes are designed
to match your target needs.

MC luffing boom Tower Crane can meet the requirements of small or narrow space job sites.

If you want to know more about this top slewing tower crane,please contact us at any moment you want.


The MC luffing cane has a small slewing radius on its tail, thus effectively preventing the jib from
a collision with the building nearby.
This enables the construction crane to be perfectly used for the particularly high buildings
construction sites with an extremely restricted space. 

With super large lifting moment, our Luffing Jib Tower Crane is suitable

you can refer to our Luffing Jib crane pictures

LT4015-6t, luffing jib craneluffing jib crane 10ton16t  luffing crane from chinese tower crane factory

Luffing Jib

Luffing Jib,Luffing Jib Tower Crane,Luffing Tower Crane,Luffing Crane

Miliscorp Industry Ltd , https://www.mctowercrane.com