The Gospel of Beekeeping Professionals - Beekeeping

Where does the honey we love to drink come from? The primary school students all know that the honey was collected. That's right, our bees also have their own special vehicle, the Beekeeping. It is a bee-keeping vehicle with bees that can feed bees while it is being flowed, and it can also be used as a dedicated vehicle for beekeeping equipment that can be used for office work and production of bee products.

1.jpg

Beekeeping vehicles are specially designed for beekeepers. The sides of the rear compartment are multi-layered frames. The internal dimensions should be designed in accordance with the relevant national standards and standards for the size of the beehive. The frame can hold at least 80 beehives. The space between the beehives on both sides is a workplace. The sun protection and rain-proof ceiling should be set above the channel, and the ventilation is good. The space here is mainly used to complete the collection of bee products. The front part of the car box is designed as an independent living space, where users can place satellite television, solar power generation equipment, refrigerators and other living facilities to facilitate field life and improve the quality of life. Solar power and electricity storage systems are installed on the roof to supply electricity. The storage box is also designed at the lower part of the car trunk to facilitate the storage of various beekeeping tools and daily necessities and facilitate the use of beekeeping professionals in the field. In addition to transporting bee colonies, beekeeping vehicles can also transport honey barrels, bees, bee products, etc. It consists of three types of vehicles and has been listed as a national official product.

2.jpg

In China, there are three types of beekeeping vehicles developed so far: flat-head double-seat cabs, silo-type carriages, and high-column panels. Popular points are divided into light cars, medium cars, medium cars. The side panel of the light vehicle can be folded and then bee-plated with the floor of the carriage. This vehicle can also be used as a mobile bee-car with water-carrying equipment and a storage tank that can accommodate 100 standard flat boxes. Medium-sized car compartments are divided into compartments and cargo compartments. Garage compartments can be loaded with 300 kilograms of bees, daily necessities or 30 standard flat boxes, and cargo compartments can be loaded with 240 standard flats. Heavy-duty trucks are semi-trailers, semi-trailers Relying on the support leg for independent parking, it is specially used as a flow-discharging vehicle and can load 420 standard flat boxes.


Today, although we have succeeded in producing bee special vehicles integrating production, living, and storage, we are still facing a severe test. Beekeeping special vehicles have many advantages compared with traditional beekeeping. Apart from lifting the problem of beekeepers' difficulty in transporting bees, they have greatly improved the mechanization level of beekeeping production, reduced the labor intensity of beekeepers, and improved the maintenance of beekeepers. Beeman's living conditions have improved work efficiency. Many beekeeping professionals have stated that they have brought us a lot of convenience since they had a bee-keeping vehicle. They do not have to pick, do not have to unload, and are convenient for loading and unloading. They also solve the problem of housing, have water and electricity, and are convenient. It is really our beekeeping professional households. The gospel.


Thrust bearings are usually made up of two thrust washers or more thrust washers and some rolling bodies. The general thrust gaskets are divided into shaft and seat parts. The most common type of rollers is composed of iron or copper cage holders. This type of bearing is the most common type of ball type Thrust Bearing. The design and use of thrust bearings are designed to withstand axial loads. They are also known as axial bearings. These include bearing thrust ball bearings, thrust cylindrical roller bearings, thrust roller bearings, thrust Tapered Roller bearings and thrust roller bearings.zhitui2

The thrust bearing is used to load the axial load. They are also known as axial bearings. Similar to radial bearings, the thrust bearing consists of two seat rings, a set of rolling elements and a cage for keeping the rolling element. The main difference between the axial (thrust) bearing and the radial bearing lies in the layout of the Bearing Ring. In axial bearings, two seats are arranged parallel and arranged in parallel in the direction of the axial direction. The rolling body is sandwiched between two rings. According to the rolling body geometry, thrust bearing points ball bearing, thrust roller bearings and Thrust Roller Bearing

zhitui1


Thrust Bearing

Thrust Bearing,Thrust Roller Bearing,Thrust Ball Bearing,Thrust Bearing Sizes

LUOYANG AUTO BEARING CO.,LTD , https://www.lyautobearing.com