Yunnei Non-road T3 Product Service Exchange Meeting Hefei Launched
At the service training conference, Yunnei Dynamics explained the service concept of “open service and active service to allow customers to enjoy service as a standardâ€, emphasizing that in the three-phase market form, the power supplier service has shifted from engine service to vehicle service. It is very important to actively study and improve to adapt to the market. After the first half of the year T3 product market service, the participating service providers presented many typical fault problems at the conference site, and the live exchange atmosphere was active. The technical engineers of the electronic control system, fuel system, and power system at the meeting also had a more intuitive understanding of the T3 non-road mechanical operation and work characteristics. From the perspective of product technology development, the three-stage electronically-controlled common-rail engine is more intelligent, simplistic, and intuitive than the two-stage product and VE pump product. It can quickly and accurately diagnose ECU faults. To identify the source of the fault, thus saving maintenance time and improving the work efficiency of the entire vehicle, so that the convenience, efficiency, and economy of product use are greatly improved, bringing greater added value to the user. Since 2015, Yunnei has begun to set up a service force reserve for the T3 electronically controlled common-rail engine. To date, it has carried out several rounds of different forms of service training and exchange meetings, supplemented by a market “110†service team, 1+N. Various service support forces such as the service agent model and efforts to build product service support capabilities are currently gaining increasing acceptance of T3 electronically controlled common-rail engine products and services, and the market share of Yunnei’s non-road power products continues to increase. We will further deepen the concept of open service and active service, and continue to improve customer service satisfaction with the principle of “allowing customers to enjoy services as a standard†and jointly welcome the arrival of a new era of peace of mind, energy saving and environmental protection! Welding Angle Magnet
Though not recommended for lifting applications, each model has a pull rating of 50 pounds.
Weld clamp magnets are predominantly used to hold pieces of ferromagnetic materials in position for tack welding. Welding Magnet,Triangle Welding Magnet,Welding Angle Magnet,Arrow Shape Welding Magnet Changzhou Edaweld Trading Company Limited , https://www.edaweld.com
Participating Service Representatives Visit Yunnei Power Plant 
Participating service provider representatives visited Yunnei Power Co., Ltd. 
Yunnei Dynamics Hunan-European Region Non-road Three-phase Product Service Exchange Conference
(Right) Strong magnets attract to any ferrous metal object and leave both hands free to safely work on the project. Ideal for fast setup and accurate holding for all welding jobs.
The arrow model covers 45, 90 and 135 degree welding angles
The protractor model covers 30, 45, 60, 75 and 90 degree welding angles
Tack welding is where a series of small welds are used to align pieces of metal securely before completing with a final weld.
Wonkee Donkee says "A ferromagnetic material is a term for anything attracted by a magnetic force. To be ferromagnetic it must contain a element of iron, nickel, cobalt, or gadolinium"
Welding a bicycle frame with an arrow fixed multi angle weld clamp magnet
Weld clamp magnets can help to weld together things such as steel gates, metal stair steps and bicycle frames.
Inside and outside corners produced by a corner fixed multi angle weld clamp magnet on a sheet of steel
They can be used to create the inside and outside corners of box section steel as they can hold metal at a variety of different angles.
Box section steel is a square or rectangular hollow steel box used for general fabrication and construction.
Soldering two pieces of metal together that are held at a right angle with an arrow fixed multi angle weld clamp magnet
Weld clamp magnets can also be used to hold thin pieces of metal together at different angles to allow them to be soldered together.
Soldering uses a melted alloy to form a thin layer between the two pieces of metal to join them together.
Layout work on a hexagon shaped steel structure with multiple magnetic square fixed multi angle weld clamp magnets
They can be used as supports for steel structures whilst doing layout work. Layout work is a process where reference points are marked across pieces of metal in order to create a template.
The template on the metal is carried out before starting to alter the steel structure in any way e.g. drilling holes into it.