Where to find used car sales information
Used cars, as a phenomenon that is now very common in the auto industry, have become the primary choice for many people who want to buy a car but lack funds due to low prices. However, as consumers, where are we going to find used cars for sale? Where can you buy a used car before it is deceived or can you buy a good and cheap product? This is also a problem that many consumers are very concerned about and will be introduced later. First of all, there are usually some used car markets in some large cities such as Beijing and Shanghai. Buying used cars in these markets is relatively secure. However, the premise is that the used car market that you go to has relevant sales documents or is subject to inspections such as industrial and commercial taxation. So, you can go to some of the used car market to understand some used car sales information. You can understand the relevant sales person based on the desired model and price. Second, in an era when such a network is very developed, any item can be found on the Internet. So, you can also look at some websites that sell used items. I personally know that a second-hand website called “Floating Fish†is not bad. You can find out about used car sales on some of these official websites. Finally, in general, I suggest that it is best not to buy used cars directly in the hands of individuals. Unless you understand the owner or the performance of this car. Because many used cars for sale may involve illegal acquisitions and other bad backgrounds. Therefore, in order to avoid trouble, it is best to understand the used car sales information in a special place. In fact, used car sales information can be seen everywhere around us, but if you really want to buy a used car, then I think it's best to ask a dedicated person to help understand the relevant performance and accessories of this car. After all, used cars have more or less problems with new cars.
Standard: ANSI/ASME B16.5, JIS B2220, KS B1503, EN1092-1, UNI, DIN, BS, AWWA, API, MSS, SABS, ASA, GOST standard
Types' Specification
FAQ:
Flange Bearing,Steel Flange,Forged Flange,Welding Neck Flange Wenzhou Qili Fluid Equipment Co., Ltd. , https://www.qlssvalve.com
Method: By forging, Forged Flange, stainless Steel Flange
Pressure: 5K-30K (JIS B2220/KS B1503), 150Lbs - 2500Lbs (ANSI), PN6-PN100 (DIN, UNI, EN1092-1)
Size: 1/2"- 80", DN15-DN2000.
Type: Welded Neck, Blind, Threaded, Lap Joint, Socket Weld, SOH, SOP, Slip On (SO) FF, RF, Plate
Material: 304, 316L
Marking: On Required
Packing: Wooden Pallets
Painting: Rust-preventative oil painting or Black/yellow/varnish painting or Galvanizing
Quality control: Internal/ ISO9001, KS approval etc
Inspection: Internal / Third party
Certificate: Material certificate, Physico-chemical analysis certificate etc.
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
1.Are you a trader or manufactor?
We are a manufactor (Own Forging workshop and CNC machining workshop )
2.Can your products reach to FDA , CE and 3A requirements?
Yes, all of our material can reach to the requirements of FDA, ISO and 3A Certificate).
3.We can supply:
Sanitary Butterfly Valve, Sanitary Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings , (Pipe Unions: SMS, DIN, IDF, RJT, 3A,DS; Fittings: Ferrule,Elbow, Tee, Reducer and all other Non-standrad fittings), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
4.Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FedEx, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Paypal,Western Union
6.About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: By sea, by air or by express. Any question about samples, please contact us.
7.For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question or problem will be respond within 12 hours.
9.Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
10.Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
11.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
12.Purpose:Attitude is everything.