**Steel Price Update – April 5, 2025**
Below is the latest update on steel product prices across different specifications and manufacturers. Prices are listed in Yuan per ton, with comparisons to yesterday and last week.
- **General Line**:
- Φ6.5mm Q235 (Handan Steel) – 4,380 Yuan/ton (no change from yesterday or last week).
- Φ10mm Q235 (Stone Horizontal) – 4,380 Yuan/ton (same as previous days).
- **High Line**:
- Φ6.5mm Q235 (Handan Steel) – 4,430 Yuan/ton (no change).
- Φ6.5mm Q235 (Xing Steel) – 4,530 Yuan/ton (up by 50 from last week).
- **Rebar**:
- Φ12mm HRB335 (Jinan Steel) – 4,480 Yuan/ton (no change).
- Φ14mm HRB335 (Jinan Steel) – 4,430 Yuan/ton (no change).
- Φ16–25mm HRB335 (Jinan Steel) – 4,380 Yuan/ton (down by 50 from last week).
- Φ16–25mm HRB335 (Laiwu Steel) – 4,380 Yuan/ton (down by 100).
- Φ16–25mm HRB400 (Jinan Steel) – 4,530 Yuan/ton (down by 70).
- Φ16–25mm HRB400 (Laiwu Steel) – 4,450 Yuan/ton (down by 50).
- **Hot Rolled Sheets & Coils**:
- Hot Roll 2.5*1250*c Q235 (Shao Steel/TISCO) – 5,000 Yuan/ton (no change).
- Hot Roll 2.75*1250*c Q235 (Bengang/TISCO) – 4,950 Yuan/ton (down by 20).
- Hot rolled coil 3.0*1250*c Q235 (Benxi/Tisco/Tangshan) – 4,800 Yuan/ton (up by 20).
- Low-alloyed coil 5.5*1500*c Q345 (Jinan Steel) – 4,800 Yuan/ton (up by 20).
- **Cold Rolled Sheets**:
- Cold-rolled sheet 1.0*1250*c SPCC (Steel) – 5,660 Yuan/ton (no change).
- Cold rolled plate 1.0*1250*2500 SPCC (Saddle) – 5,750 Yuan/ton (up by 70).
- Cold rolled steel plate 1.2*1250*2500 SPCC (Wuhan Iron and Steel) – 5,750 Yuan/ton (up by 70).
- **Puzhong Plates**:
- 8mm Q235 (Jinan Steel) – 5,740 Yuan/ton (down by 50).
- 10mm Q235 (Tiangang) – 5,430 Yuan/ton (down by 170).
- 16mm–20mm Q235 (Wenfeng) – 5,050 Yuan/ton (no change).
- **Low Alloy Plates**:
- 8mm Q345 (Jinan Steel) – 5,840 Yuan/ton (down by 20).
- 14mm Q345 (Jinan Steel) – 5,300 Yuan/ton (down by 90).
- **Specialty Plates**:
- Boiler plate 10mm 20g (Jinan Steel) – 5,870 Yuan/ton (no change).
- Container plate 10mm 16MnR (Jinan Steel) – 5,960 Yuan/ton (no change).
- **Galvanized Sheets**:
- 0.5mm*1000*C SGCC (Hengtong) – 5,850 Yuan/ton (no change).
- 1.0mm*1000*C ST02Z (Benxi Steel) – 5,350 Yuan/ton (no change).
- **Pipe Products**:
- Seamless Pipe Φ108*4.5 20# (Smoke Pipe) – 5,950 Yuan/ton (no change).
- Welded pipe 1 inch Q235 (Youfa, Hengshui) – 4,700 Yuan/ton (no change).
- **Structural Sections**:
- I-beam 25# Q235 (Haicheng) – 4,470 Yuan/ton (down by 30).
- Channel 16# Q235 (Jinan Steel) – 4,400 Yuan/ton (down by 70).
- Angle Steel 50*50# Q235 (Aluminum Steel) – 4,620 Yuan/ton (down by 30).
Market conditions remain stable overall, with minor fluctuations observed in certain products. Prices for rebar and plates show some downward pressure, while cold-rolled and galvanized sheets have seen slight increases. Buyers are advised to monitor further developments closely.
VW AUDI VVT SOLENOID
Variable valve timing (VVT) solenoid or oil control valve controls the oil flow according to the engine speed and load. VVT solenoid is a vital part of the variable valve timing system.
The Oil Control Valve (OCV) is a a critical part used in every engine that is fitted with variable valve technology (VVT). A single control valve will regulate the supply of oil to a designated VVT hub, to advance or retard the timing by altering the camshaft angle position. Controlled by the ECU, the OCV receives electrical signals, instructing it to adjust the oil flow as required, in accordance to current driving conditions.
Volkswagen Variable Valve Timing,Variable Cam Timing Solenoid,Timing Solenoid Valve,Exhaust Timing Solenoid
Wenzhou Zhongking Parts Co.,ltd , https://www.oemvvt.com