Adblue Emulator for MAN Euro 6 Truck AdBlue Emulator User Manual:
Emulator For MAN Euro6 Truck New SRS Euro6 Emulators
Flower Sleeve,Flower Bouquet Sleeves,Sleeve Flowers,Cellophane Flower Sleeves SHANGHAI WELLONG IMPORT AND EXPORT CO., LTD , https://www.chinafloralfoam.com
Cablesmall Adblue Emulator for MAN Euro 6 Truck AdBlue Emulator User Manual:
Adblue Emulator for MAN Euro 6 Truck from cablesmall does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.
Next, you need to remove the fuses:F894(Multisensor In AdBlue tank) F738 (+30 Signal of AdBlue pump)F1084 (NOx sensor Upstream)Fuse F737 is now fuse of emulator. Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.
Finally, you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.OBD2Tuning com Focus on OBD Tool Since 2008
https://CablesMall/
This article is compiled by cablesmall com.