Titanium ore dressing plant - Nalakupa Concentrator (Australia)
Epinal Cooper (Narecoopa) beneficiation plant put into operation in April 1969, is located in a beach placer gold island of Australia. The deposit contains about 50% by weight of minerals, mainly of useful minerals rutile and zircon, leucoxene followed, titanium iron ore, magnetite, garnet and cassiterite. The concentrator is divided into two parts: roughing plant and selected plant. The raw ore is mined into the roughing plant and pre-screened through a 4 mm sieve. The sieve is discarded and the product is sieved to 32 Ford-type spiral concentrators for rough selection. A spiral concentrator is used for re-election. The two spiral concentrator concentrates were pumped to three Gill-type magnetic separators for magnetic separation. The magnetic product is an ilmenite concentrate. The non-magnetic products are scrubbed by the Linatex jet impact box, and then 8 shakers are selected. The shaker concentrate is tin concentrate, and the secondary concentrate is a coarse concentrate containing zircon and rutile. To this operation, the tailings are returned to the re-selected spiral concentrator for re-engineering. The rough selection process of the plant is shown in Figure 1. Figure 1 Nale Cooper rutile wet selection plant process The coarse concentrate selection is carried out by high pressure electric selection, strong magnetic separation and wind shaker dry selection combined process (see Figure 2). Selected from zircon and rutile concentrates. Figure 2 Nalakupa rutile company dry selection plant process
It is a white inorganic pigment with non-toxic, best opacity, best whiteness and brightness, and is considered to be the best white pigment in the world today. Titanium white has strong adhesion, is not easy to change chemically, and is always white. Widely used in coatings, plastics, papermaking, printing inks, chemical fiber, rubber, cosmetics and other industries. It has a high melting point, and is also used to make refractory glass, glaze, enamel, clay, high temperature resistant laboratory utensils, etc.
Anatase titanium dioxide belongs to pigment grade titanium dioxide, which has the characteristics of strong hiding power, high coloring power, and good weather resistance. Mainly used in industrial sectors such as rubber, plastics, papermaking, printing inks, coatings and chemical fibers.
The use of anatase titanium dioxide mainly has the following aspects: Titanium dioxide for papermaking generally uses anatase titanium dioxide without surface treatment, which can play the role of fluorescence and whitening, and increase the whiteness of paper. The titanium dioxide used in the ink industry has rutile type and anatase type. It is an indispensable white pigment in advanced inks. The titanium dioxide used in the textile and chemical fiber industries is mainly used as a matting agent. Since the anatase type is softer than the gold red type, the anatase type is generally used. Titanium dioxide is not only used as a coloring agent in the rubber industry, but also has reinforcing, anti-aging, and filling functions, and is generally based on anatase. Anatase Titanium Dioxide,Titanium Dioxide Anatase,Anatase Titanium Dioxide For Rubber,Anatase Titanium Dioxide Powder Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com