How to prevent high temperature in tank truck in summer

Now that the temperature is high throughout the summer, how can we prevent high temperatures during this hot summer?

Air conditioning after ventilation

In summer, when parking in strong sunlight for more than one hour, the temperature inside the tank car will be as high as fifty or sixty degrees Celsius. Some friends are always accustomed to open the air conditioner on the first train, which will cause excessive load on the engine startup. The practice is: After the car first pull down the window of the tanker, run for a few minutes after starting, etc., and then put the heat inside the car out, and then close the window to open the air conditioning. This cools the tanker, the compressor No need to spend a lot of effort to reduce the temperature, the cooling effect is good, the engine load is reduced, and the power is not affected.

Hot drive

Some tanker drivers have an impatient friend, especially those who just learn to drive. They like to drive a fast train, and they can't see the slow road in front. However, opening the air conditioner will reduce the sensitivity of the vehicle's power system and it will easily cause the driver to misjudge. Dangerous accidents happened. I opened another car before, and when air conditioning was turned on in the summer, not only did the speed fail to improve, but it also felt like the car couldn't stand still, and pedaling would not help in the end. In this case, overtaking, sudden braking or multiple There are potential dangers in either or both of them. Traffic should not be impetuous, after all, it is the safe way to drive.

Always check the explosion-proof tire

Summer pavement temperature is often as high as 70 °C or more, if the tire's heat is not good, tanker cars can easily cause a puncture.
When driving, it is best to bring a “barometer”. To be mechanical, there will be errors after the electronic watch is used for a period of time. Check the tire pressure regularly for the tanker, not too low, or too high, keep the standard Tire pressure to avoid puncture

Cleaning Solution For Electronic Precision

Product Features

Solubility: mild

Reliability: extremely stable

Fast drying: higher boiling point, completely volatile

Renewability: Reducing the amount of industrial waste by distillation

Permeability: low viscosity, low surface tension, high density, high fluidity

Safety: no flash point, non-flammable liquid, easier to set up

Environmentally friendly: It does not consume ozone and easily passes various environmental standards.

Material compatibility

Due to its high stability, in addition to the strong alkali strong acid strong reducing agent, the general materials are suitable; for the sake of safety, it is recommended that the user first make compatibility test and overall evaluation before applying to production.

Cleaning Solutions,Fluorinated Solvent,Electron Fluoride Solution,Cleaning Solution For Electronic Precision

Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtechs.com