· BMW recalled 222 5 Series/7 Series airbag sensors

Recently, BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to recall the following vehicles from now on, a total of 222 vehicles. :

(1) BMW (China) Automobile Trading Co., Ltd. recalled some imported BMW 523i, 535i, 550i, 730Li, 740Li and 750Li produced between November 27, 2008 and May 9, 2012, for a total of 157 vehicles;

(II) BMW Brilliance Automotive Co., Ltd. recalled some domestically produced Brilliance BMW 520Li, 523Li, 528Li and 535Li produced between July 19, 2010 and April 30, 2012, totaling 65 vehicles.

In the course of after-sales maintenance of the vehicle within this recall, a defective airbag sensor module may be installed. Due to software programming errors in the defective sensor module, the airbag, the seat belt pretensioning device and the active headrest will not be activated in the event of a front or rear collision of the vehicle, posing a safety hazard. BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will conduct free inspections for vehicles within the scope of the recall. If defective parts are installed, the airbag sensor module will be replaced for free to eliminate safety hazards.

BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will notify customers by registered mail. After the official start of the recall, authorized BMW dealers will contact the relevant owners to arrange the recall.

Brandt 4'X5' Shaker Screen

Brandt 4' × 5' Shaker Screen

Replacement Hook Strip Soft Screens for Brandt 4' × 5' / B40 Shakers

Replacement Brandt 4' × 5' shaker screen is a kind of hook strip soft shaker screen. It is made of 304 stainless steel wire mesh cloth, designed with 2–4 layers composite bonded construction. Without steel backing plate, it offers maximum non-blanked area but increased fluid capacity. Bottom layer is made of coarse stainless steel wire mesh. It can supplies sieving action and serves as a support plate.


Technical Parameter

  • Mesh Material: stainless steel 304/316/316 L.
  • Frame Material: Q235 steel.
  • Screen Type: XL, XR, MG.
  • API RP 13C Designation: API 120 – API 325.
  • Suitable Environment: water-based.
  • Package: packed in paper carton, shipped by wooden case.


Adaptable Shale Shaker Model

SJ-Brandt 4' × 5' shaker screen are used as the substitute screen for

  • Brandt 4' × 5' / B40 shale shaker

Competitive Advantage

  • XL and XR mesh offer fine solids removal.
  • Reduce requirement for mud dilution and treatment.
  • Easy to install without any tools.
  • Manufactured according to the API RP 13C (ISO 13501).
  • Scientific & reasonable cost control system for competitive price.
  • Adequate inventory in the shortest time to meet customers' demand.
Brandt 4'X5' Shaker Screen

Remarks:

Brandt 4' × 5', B40, are marks of Varco I/P, Inc.

ShengJia only produces the replacement screens but not original from Brandt.

Brandt 4'X5' Shaker ScreenBrandt 4'X5' Shaker Screen


Brandt 4'X5' Shaker Screen,Brandt 4'X5' Shale Shaker Screen,Brandt 4'X5' Oil Shale Shaker Screen ,Brandt Shakers

Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com