What are the routine inspections after the garbage truck is taken over?
Routine inspections after the collection of garbage trucks generally require the following items: First, cleaning garbage truck bins, in the cleaning process, it is best to do a fixed cleaning, the best direct sewage into the sewer, do not stay on the road to cause secondary pollution. Second, check the garbage truck engine is running normally, check for leaks, check and supplement fuel, oil, cooling water; according to the provisions of the lubrication point inspection and lubrication (fat); twist the oil filter handle 34 turn Hand touch the brake drum is hot or too hot; Garbage truck tire pressure is adequate; Temperature is below 0 °C, no antifreeze should be put the cooling water net; cold areas, the garbage truck battery should be removed to put In the warm room, turn off all switches and knobs. 3. Check and equip the vehicle tools and accessories, clean the exterior of the whole vehicle, and clean the cab and carriage; check whether the brake fluid level of the master cylinder meets the requirements; finally, press the garbage truck door switch button and unplug the ignition key. Close the door. After the door is closed, you should pull it again to see if it is locked.
Clear Flat bag is made from Food Grade Virgin material. environmentally friendly and hygienic. They are water-proof, Moisture-proof, strong toughness, tear resistance, good for storage and usually for packing sugar, biscuits, candy, coffee bin, fruits , drinks or other foods. Normally width from 3 inch to 12 inch. Length from 7 inch to 22 inch. Material could be in HDPE or LDPE.
Clear Flat Bags, Polyethylene Flat Bags, Clear Flat Polyethylene Bag, Side Seal Bag, Clear Bag, Crystal Clear Side Gussets Bags BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmplasticbag.com