Sz Conical Twin Screw Plastic Extruder Gearbox Double Screw
Special Union,Carbon Steel Union,Stainless Steel Hammer Union,Carbon Steel Union Fitting Hebei no one but god energy equipment co.,ltd , https://www.p-harcourtbrothers.com
SZ conical double-screw plastic extruder gearbox series
Detailed introduction:
This series product adopts hard tooth surface transmission device produced according to JB/T9095.1-1999 standard, consisting of reducer and distribution box, as the special product supporting conical twin screw extruder.
Main product features:
1. The gear of reducer adopts high-strength alloy steel carburizing steel, grinded through carburizing and quenching, with level 6 precision. The tooth has high rigidness and low transmission noise.
2. The distribution box adopts small taper angle helical gear and high light alloy steel, with carburizing and quenching treatment after being cut by CNC gear hobbing machine, with high precision and rigidness.
3. With the design of nodular cast iron box and high-strength thrust self-aligning roller bearing, with reliable performance, can bear large axial thrust.
4. The reducer and distribution box are equipped with cooling device, with safe operation.
5. All cutting appearances are flat and beautiful. Besides current specification, the product of other specification can be customized according to the user's requirement.
spec.
input rotation speed
output totation speed
input power
Single shaft output torque (N.m)
Distribution shaft including angle
connection spline size
SZ45
1500
44.8
18.5
1972
2°40´
8-48×42×8
SZ50
1500
37.8
22
2779
2°58´12"
8-54×46×9
SZ55
1500
37.5
30
3820
2°36´14"
6-60×53×14
SZ65
1500
39.1
37
4518
2°11´16"
8-65×56×10
SZ80
1500
37.7
55
6786
2°0´18"
8-72×62×12
SZ92
1500
40
110
13130
1°52´3.64"
10-98×92×14
SZ conical double-screw plastic extruder gearbox series
Detailed introduction:
This series product adopts hard tooth surface transmission device produced according to JB/T9095.1-1999 standard, consisting of reducer and distribution box, as the special product supporting conical twin screw extruder.
Main product features:
1. The gear of reducer adopts high-strength alloy steel carburizing steel, grinded through carburizing and quenching, with level 6 precision. The tooth has high rigidness and low transmission noise.
2. The distribution box adopts small taper angle helical gear and high light alloy steel, with carburizing and quenching treatment after being cut by CNC gear hobbing machine, with high precision and rigidness.
3. With the design of nodular cast iron box and high-strength thrust self-aligning roller bearing, with reliable performance, can bear large axial thrust.
4. The reducer and distribution box are equipped with cooling device, with safe operation.
5. All cutting appearances are flat and beautiful. Besides current specification, the product of other specification can be customized according to the user's requirement.
spec.
input rotation speed
output totation speed
input power
Single shaft output torque (N.m)
Distribution shaft including angle
connection spline size
SZ45
1500
44.8
18.5
1972
2°40´
8-48×42×8
SZ50
1500
37.8
22
2779
2°58´12"
8-54×46×9
SZ55
1500
37.5
30
3820
2°36´14"
6-60×53×14
SZ65
1500
39.1
37
4518
2°11´16"
8-65×56×10
SZ80
1500
37.7
55
6786
2°0´18"
8-72×62×12
SZ92
1500
40
110
13130
1°52´3.64"
10-98×92×14