The development trend and characteristics of aerial vehicles

First, the high-altitude jobs car Category:
1. According to type: vertical lift type (also known as scissor type) aerial work vehicle, folding arm lift type aerial work vehicle, self-propelled aerial work platform, telescopic boom type aerial work vehicle. Among them, the vertical lifting work load is significant, but the operation height is limited, and the mobility is not good and it is inflexible. At present, the domestic boom-lifting type aerial work vehicle is widely used in China.

2. According to the working height: 6 meters, 10 meters, 14 meters, 16 meters, 18 meters, 22 meters, 25 meters, 30 meters, 50 meters, currently the highest foreign countries can reach 80 meters.

Second, the application of high-altitude vehicles:

Widely used in power, street lamps, municipal, gardens, communications, airports, construction (repair) ships, transportation, advertising, photography and other high-altitude operations.

Third, the characteristics of aerial vehicles:

In the operation bucket and rotary seat, there are operating devices to remotely control the start, stop, high speed and low speed of the engine. The electro-hydraulic proportional valve is used to control the movement of the arm. The stability is good, and the working arm can be left and right 360° continuous. Rotation, automatically maintain the working tank level by the linkage mechanism, the main pump can operate when the failure of the emergency pump down operation slot, with night lighting, can lift heavy objects.

Fourth, the future development of aerial vehicles:

People have conceived a combined aerial work vehicle that can make one car more versatile. This car has a front part (mainly equipped with a power system) that can be used independently or connected with different carriages to become a small truck and travel. Cars, refrigerated trucks, racing cars, etc. are replaced at any time as needed. In the future automobile world, there will be several special automobile passenger transport systems. One is the “air bus” vehicle. It has the dual advantages of both land and air. It can be used on land, as well as ordinary buses. Driving into a special airplane for air travel reduces the trouble of passengers getting on and off the plane.

In the future, there will be more high-profile aerial vehicles with unique shapes and high performance. For example, crawler-type air-conditioned vehicles use inflatable rubber tracks to replace the wheels of cars, allowing them to walk on muddy roads or wetlands. The non-wheel-walking type of car is manufactured with the characteristics of animals walking. It is equipped with four legs, and it is very flexible for both pit and mud. There are also land, sea and air vehicles, UFO cars, submarine cars and so on. Computers are widely used in high-altitude vehicles and will be an important symbol of future cars. The future car will be equipped with a computer command system. The driver's will and the external driving conditions can be combined to convert into electrical signals, which are then transmitted collectively to the microprocessor. After analysis and calculation, instructions are issued to various parts of the vehicle. Make the car safer and more reliable. There can even be unmanned "smart" cars. There is also an unmanned automatic passenger car. The size of the aerial working car is similar to that of the current passenger car. There are four or six seats. The difference is that this passenger car has only two wheels and the left side is a The cantilever is in contact with the track on the upper left side of the vehicle. In addition to the guide, the track is also responsible for transmitting automatic signals and transmitting electric power.

Coffee Tamper

Coffee Tamper


The best barista coffeeware----Coffee Tamper. Which can help customers taste the best espresso .

About the coffee tamper ,we have many different kinds for you to select.

Coffee tamper with different kinds of wooden handle is our hot sell items.

The whole stainless steel coffee tamper also with high quality, we also have the color coffee tamper items.

Our customer usually combine the coffee tamper with the silicone tamper mat and the clean brush as one set to sell ,which is the selling point to catch the market.

Any items need to know more or any idea about it, please don`t hesitate to contact us.

Will be glad to hear from you.


Description of Coffee Tamper

Size : 49mm/51mm/58mm

Material: Body: SS304+wood/Aluminum

Color/wood type :customized

Finishing: Satin polishing ,Mirror Polishing ,Color painting

Logo: Laser logo, Etching logo, Silk printing logo, Embossed logo, Decal logo

MOQ : 2000 PCS

Packaging : White box, Mail box or Customized package

Sample Time : 7~10 days

Lead Time :60 days after have the deposit

Payment: T/T ,L/C or others

Payment term: 30% deposit before production and 70 % balance against the copy B/L

coffee tamper with wooden handlecoffee tampertamper set

FAQ:


1:How can I get the sample?

We can provide the sample for customers to check the quality.

Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.

You can do the payment of sample via T/T and PayPal.


2:How about the sample time?

Usually the sample time is 7~10 days after have the sample cost.


3:How long will it take for mass production?

Usually 45~60 days after have the deposit.


4:Can we have our logo or company name to be printed on your products or the package?

Welcome OEM.


5:what certificate can you provide?

CE,CB,GS,FDA,LFGB,ROHS are available here.


6:How can we get your monthly new products announcement?

Please join our mailing lists.

Espresso Tamper,Barista Tamper,Espresso Coffee Tamper,Barista Coffee Tamper

Jiangmen Wellway Houseware Co.,Ltd , https://www.wellwaycc.com