Corrosion of metal valves and valves for synthetic materials

Valve corrosion, usually understood as the valve metal material under the chemical or electrochemical environment suffered damage. As "corrosion" occurs in the spontaneous interaction between metal and the surrounding environment, how to separate metals from the surrounding environment or use more non-metallic synthetic materials has become a common concern. As we all know, metal corrosion damage to the valve's duration, reliability and service life have a considerable impact. The effect of mechanical and corrosion factors on the metal greatly increases the total amount of contact surface wear. Valve in operation, the total amount of wear on the surface of the friction. During operation of the valve, the frictional surface is subject to wear and tear as a result of simultaneous mechanical action and chemical or electrochemical interaction of the metal with the environment. For valves, the climatic conditions of the pipeline work are complicated; the presence of hydrogen sulfide, carbon dioxide and certain organic acids in media such as oil, natural gas and formation water increases the destructive power of their metal surfaces and rapidly loses their ability to work. As the metal's chemical corrosion depends on the temperature, the mechanical load on the friction parts, the sulfide contained in the lubricating material and its acid resistance, the duration of the contact with the medium and the catalytic effect of the metal on the nitriding process, Material molecules on the metal conversion speed and so on. Therefore, the anticorrosion method (or measure) of metal valve and the application of synthetic material valve have become one of the topics of the valve industry research at present. 1. Anticorrosion of metal valves is to be understood as applying a protective coating (such as paint, pigments, lubricants, etc.) on metal valves that protects them against corrosion so that the valve, whether manufactured, stored, transported or in its The entire process is not subject to corrosion. The method of metal valve corrosion protection depends on the required protection period, shipping and storage conditions, valve construction features and materials, and of course, the economic effects of antisepsis to be considered. There are four main methods of anticorrosive metal valves and their parts: 1, the volatile anti-corrosion agent into the atmosphere of the steam (wrapped with a resistive paper, blowing air to inhibit the passage of products through the chamber, etc.). 2, using the resistance of water and alcohol solution. 3, the anti-corrosion (protection) material coated on the valve and its parts surface. 4, the resistance of the thin film or polymer coating on the valve and its parts surface. (Note: The current valve manufacturers, the widespread use of lubricants and water resistance to dissolve the flow of anti-corrosion.) Second, the application of materials, valves, synthetic materials, valves in many corrosive conditions are better than the metal valve, the first is anti-corrosion Sex, followed by the net weight, as its strength, depends on the shape of the enhanced fibers, arrangement and quantity. (In general, the greater the percentage of fiber, the greater the strength of the composite.) In valve applications, the weight content of the fibers ranges from 30% to 40% by weight, whereas the chemical stability is primarily due to the potting of the final product Fiber resin properties of the body decided. In synthetic valves, the solid polymer body can be either a thermoplastic such as PVC-PVDF, PPS-PPS, or a thermosetting resin such as polyester, ethylene and epoxy Wait). Thermosetting resins retain their strength at elevated temperatures compared to thermoplastics (ie thermosetting resins have a higher heat distortion temperature). (Note: The determination of the heat resistance of a composite during its service life is referred to as the heat distortion temperature.)

Our Air Cooled Uv Led Curing solution is a proprietary product for future.

It's seamless assembled on emitting area& specialized arrays(linear or arching)by your requirement.Designed for a range of applications in curing process involved adhesives , coating & inks, from small to wide substrates, the Bingri UV LED solution delivers an unique performance environmentally-friendly with high power UV output and low temperature curing for outstanding throughput and increased production yields.Our series are available in 365nm, 385nm,395nm and 405nm, utilizing vertical chip package comprised of most reliable chip & quartz len to achieve optimal irradiance at optional distance according to requirement. We provide viewing angle 60° & 30° options to develop your energy-efficient UV Curing process .

Peimary features:

1. Intelligent Touchpad Panel Controls

2. Abnormality Alarm System

3. Temperature Controls by Air radiator

4. Energy-efficient & environmentally-friendly


Air Cooled UV LED Curing

Air Cooled Uv Led Curing,Led Uv Curing,High Power Led Curing,Uv Curing For Printing

Bingri Electronic Technology (Shenzhen) Co., Ltd. , https://www.bingriuvled.com