PTFE Open Mesh Conveyor Belt for Fabric Dryer
Conveyor pulleys are the main elements providing the transmission of torque from the drive and ensuring that belts remain taught. As per international standard design and manufacturing technology, there are Head Pulley , tail pulley and Bend Pulley . Conveyor pulleys are often lagged with rubber to improve the friction between the drive pulley and the belt. Conveyor Pulleys are used to transmit the drive power into the conveyor belt and as such, are subjected to the dynamic belt tension forces in a conveyor.
There are a number of different types of pulleys available for use on conveyors as well as different design parameters for pulleys serving different functions on the same conveyor.
Drive Pulley: Transmit the power with the contact force between the belt and the surface of the pulley
Snub Pulley: The purpose of the Snub Pulley is to wrap the belt further around the drive pulley to improve the transmission of the driving force, and to eliminate belt slip.
Bend Pulley: Changes the direction of a belt
Take-Up Pulley: Generally attaches to a weigh and maintains proper
Tail Pulley: Turns freely, which is located at the tail end of the belt conveyor
Special: XKTE supplies both high-quality Conveyor Components and Professional bearings.
XKTE Roller Bearing- running - in material handling bulk conveyor system.
Types and arrangement of pulley bearings
The bearings are self-aligning relative to their raceways, which means that the bearings can be 'misaligned' relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing.
1. Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics.
2. Self-aligning Ball Bearing
Conveyor Pulley,Conveyor Drum Pulley,Belt Conveyor Pulley Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl                 PTFE mesh conveyor belt series
We select advanced imported loom,using high-quality imported glassfiber or Kevlar as basic weaving material, coated with excellent PTFE resin to make it into various PTFE mesh conveyor belts.
 
Features of PTFE conveyor belts:
1. High temperature resistance--It can continuously work under-140 to 260ºC, max resist high temperature up to 360ºC
2. Air permeability--It can avoid wasting heat and improve drying efficiency.
3. Chemical resistance--It can resist all most of chemical medicines.
4. Non-Sticky--It can easily remove all kinds of adhesives such as resin, paint and chemical medicines.
5. Good flex fatigue resistance--It has high tensile strength and excellent flex fatigue resistance. It's better for small wheels
 
Applications:
1.Drying machine for non-woven textile, textile printing, silk- printing and dyeing machine.
2.Shrinking machine for garment fabric, high-frequency and UV dryer.
3.Conveyor belt for hot-air dryer, various of food baking, quick-frozen machines.
4.Oiling machine for paper glazing and waxing, plant engineering.
5.Seperating sheet for hardboard production etc.
Â
Model
material
mesh size
Thickness
weight
Temp resistance
Max Width
Tensile Strength
6001
fiberglass
1x1mm
0.5mm
370g/m²
-70-260ºC
4000mm
310/290N/cm
6002
fiebrglassÂ
2x2mm
0.7mm
450g/m²
-70-260ºC
4000mm
350/310N/cm
6004
fiberglass
4x4mm
1.0mm
400g/m²
-70-260ºC
4000mm
390/320N/cm
6004B
fiberglass
4x4mm
1.0mm
450g/m²
-70-260ºC
4000mm
390/320N/cm
6007
fiberglass
+Kevlar4x4mm
1.2mm
600g/m²
-70-260ºC
4000mm
895/370N/cm
6008
fiberglass
4x4mm
1.0mm
585g/m²
-70-260ºC
4000mm
395/370N/cm
6008B
fiberglass
4x4mm
1.0mm
585g/m²
-70-260ºC
4000mm
395/370N/cm
6013
fiberglass
10x10mm
1.2mm
450g/m²
-70-260ºC
4000mm
360/300N/cm
6015
fiberglass
0.5x1mm
0.5mm
420g/m²
-70-260ºC
4000mm
310/290N/cm
6025
fiberglass
2*2.5mm
0.9mm
600g/m²
-70-260ºC
3000mm
390/320N/cm
Â
