Nickel Alloy Screwed Unions B626 Uns N10665, Hastelloy B2

Model NO.: SS Forged Fitting Union
  Product Type:
        
         Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,
        Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,
        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       
        1/2" to 4"(DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel, 
        Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.
 
+ SOCKET WELD FITTINGS

        A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

        To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.
SW Fittings are family of high pressure fittings are used in various industrial processes.
 
Types of Threaded Fittings by Class and Size
Description
Class Designation
 
3000 6000 9000
Elbows 45 and 90 degrees,
Tees, Crosses, Couplings,
Half-Couplings,
End or Pipe Caps		 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Size
by Wall Thickness		 SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS

+THREADED FITTINGS

        Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

Types of Threaded Fittings by Class and Size
Description

Class Designation
2000 3000 6000
Elbows 45 and 90 degrees
Tees, Crosses, Coupling
Half-Coupling, Cap		 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000  

Air Filters are the first line of defense to foreign contaminants which will decrease the life of your compressed air system and compressor oil. We guarantee that all of our compressed air filters will fit your compressor, vacuum pump or blower based on the OEM part number. Inlet air filters should be routinely monitored in order to insure that you are geting the most out of your air compressor, vacuum pump or blower. We do not recommend blowing out the inlet filter when it becomes clogged, instead it should be replaced. Depending on the environment, your Air Filter should be inspected at least once per month. Please contact our sales team with any questions regarding your air filter or maintenance on your compressed air system.
Most of our compressed air filters are made with a micron rating of 5 or 10 depending on the OEM specifications set forth by each manufacturer. We carry a wide range of air filters for all the major manufacturers of Rotary Screw, Reciprocating and centrifugal air compressors. Air Compressor Services also supplies air flers for blowers and vacuum pumps. Our air filters for compressors are manufactured with the highest quality fiter media available to provide continued protection for your compressed air system.Spin-On Oil Filter Element-Simple removal by spinning off and replacing the element. Manufactured of synthetic, paper, metal mesh or cloth, with a micron rating which varies based on manufacturer specifications.
The proper selection and use of compressed air filters will prevent many short and long term problems with your compressed air equipment and systems and save you substantialy in down-time and component replacement costs over the life of your compressed air system.
Oil Filters present the second barrier of protection. These are usually rated at 10 to 20 microns. Filter Material is also paper or synthetic, and can be surface loading or depth loading.
(contaminants enter the filter media and are trapped within the depth of the media, rather than only on the surface.)

Canister(Cartridge) Oil Filter Element-This consists of an element inside a metal canister. The canister must be opened, and the new filter installed inside the cavity. This element may be a variety of materials(metal mesh, synthetic, paper, or cloth) and will be manufactured with micron ratings compatible to the OEM specifications.Sinofiltec offers branded and high quality replacement filters for all domestic and international compressor OEMs. 

Air Filter for Screw Air CompressorHigh quality Screw air compressor air filtercompressor air filter elementIngersoll Rand Air FilterAtlas Copco inlet air filter


   

Compressor Air Filters

Compressor Air Filters,Compressed Air Filter,Air Compressor Air Filter

Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl