Fluorescence Spectrophotometer, 1nm /2nm /5nm /10nm /20nm, ± 0.4nm

Model NO.: SP-F98
Dispersive Element: Grating Spectrometer
Certification: ISO9001, CE
Customized: Customized
Detection Sensitivity: S/N ≥250 (P-P) or 800(RMS)
Excitation Wavelength Bandwidth: 1nm/2nm/5nm/10nm/20nm
Wavelength Accuracy: ±0.4nm
Wavelength Repeatability: ≤0.2nm
Optical System: Double-Grating Monochromator Automatic Wavelength
Trademark: Xiangyi
Transport Package: Carton/Plywood
Specification: 610mm× 460mm× 365mm
Origin: China
HS Code: 9027300000
Model NO.: SP-F98
Dispersive Element: Grating Spectrometer
Certification: ISO9001, CE
Customized: Customized
Detection Sensitivity: S/N ≥250 (P-P) or 800(RMS)
Excitation Wavelength Bandwidth: 1nm/2nm/5nm/10nm/20nm
Wavelength Accuracy: ±0.4nm
Wavelength Repeatability: ≤0.2nm
Optical System: Double-Grating Monochromator Automatic Wavelength
Trademark: Xiangyi
Transport Package: Carton/Plywood
Specification: 610mm× 460mm× 365mm
Origin: China
HS Code: 9027300000
  1. Ultra-high signal noise ratio: unique horizontal beam design, large diameter concave grating monochromator optical system, excellent luminous efficiency and ultra-high detection signal to noise ratio, the water Raman peak signal noise ratio greater than 250:1(PP) or 800:1(RMS).
  2. Ultra-high scanning speed: world's highest speed wavelength scanning 60000nm/min, can be easily achieved to scan three-dimensional fluorescence spectra of samples within 1 minute.
  3. Ultra-high resolution: Multi-level bandwidth adjustable, excitation and emission spectra can achieve 1nm, 2nm, 5nm, 10nm and 20nm five-speed adjustment. 1nm spectral resolution can easily meet similar rare earth fluorescent materials and other special fluorescent substance spectrum differentiate needs.
  4. High wavelength accuracy: precision wavelength drive mechanism and intelligent wavelength calibration, wavelength accuracy of the instrument reach to the highest level in the same type of product.
  5. Super-rich set of advanced scanning capabilities: to achieve three-dimensional fluorescence scanning, three-dimensional time scanning, wavelength difference synchronous scanning, and constant energy differential synchronized scanning functions.
  6. Less sample volume needs: only need 0.5ml sample (in 10mm sample pool) to meet the test requirements.
  7. High quality assurance: xenon light source and a photomultiplier tube detector and other key components of the instrument are made of high quality Japanese Hamamatsu.
  8. Large sample chamber: Compared to the previous generation it has a large volume of sample room design, sample replacement and accessory adjustment work more easier, more comfortable experience with the instrument.
  9. Built-in optical gate device: built-in programmable optical gate device, designed for easy photo-reactive fluorescent signal instability or a sample survey design, unified sample excitation fluorescence detection rhythm improve the accuracy of analysis.
  10. kinds of measurement accessories include: hole sample cell holder, multi-fluorescent sample holder, 200μL microcentrifuge tube measurement accessories, capillary micro sample measurement accessories, semi-automatic sample injection fluorescence attachment hole sample cell adapter, film and powder samples accessories and sample measurement sheathed sample cell holder and other accessories, greatly expanded the scope of application of the instrument.

Specifications:
Model SP-F98
Detection sensitivity (water Raman peak signal noise ratio)  S/N ≥250 (P-P) or 800(RMS)
Excitation wavelength Bandwidth 1nm/2nm/5nm/10nm/20nm
Emission wavelength Bandwidth 1nm/2nm/5nm/10nm/20nm
Minimum sample volume 0.5ml(using 10mm sample pool)
Wavelength accuracy ±0.4nm
Wavelength repeatability ≤0.2nm
Light source 150W automatic deodorizing xenon lamp (Hamamatsu, Japan)
Optical system Double-grating monochromator automatic wavelength scanning with optical excitation double beam ratio monitoring
Fluorescence Receiver Original photomultiplier (Hamamatsu, Japan)
Excitation wavelength range  200nm~900nm
Emission wavelength range  200nm~900nm
Wavelength scanning speed  10 positions, fastest 60000nm/min
Measurement line ≥0.995
Gain adjustment range  1~17 position optional
Integral Response time  7 position options: 8s ~ 20ms
Data output  Microsoft (R) Excel format, bmp image format
Data transmission  USB2.0 Interface
Light value range  -9999~9999
Peak intensity Repeatability  ≤1.5%
Power source  220V / 50Hz, 110V / 60Hz
Standard energy consumption  200W
Dimensions (mm)  610mm×460mm×365mm
Weight  21kg


 
  1. Ultra-high signal noise ratio: unique horizontal beam design, large diameter concave grating monochromator optical system, excellent luminous efficiency and ultra-high detection signal to noise ratio, the water Raman peak signal noise ratio greater than 250:1(PP) or 800:1(RMS).
  2. Ultra-high scanning speed: world's highest speed wavelength scanning 60000nm/min, can be easily achieved to scan three-dimensional fluorescence spectra of samples within 1 minute.
  3. Ultra-high resolution: Multi-level bandwidth adjustable, excitation and emission spectra can achieve 1nm, 2nm, 5nm, 10nm and 20nm five-speed adjustment. 1nm spectral resolution can easily meet similar rare earth fluorescent materials and other special fluorescent substance spectrum differentiate needs.
  4. High wavelength accuracy: precision wavelength drive mechanism and intelligent wavelength calibration, wavelength accuracy of the instrument reach to the highest level in the same type of product.
  5. Super-rich set of advanced scanning capabilities: to achieve three-dimensional fluorescence scanning, three-dimensional time scanning, wavelength difference synchronous scanning, and constant energy differential synchronized scanning functions.
  6. Less sample volume needs: only need 0.5ml sample (in 10mm sample pool) to meet the test requirements.
  7. High quality assurance: xenon light source and a photomultiplier tube detector and other key components of the instrument are made of high quality Japanese Hamamatsu.
  8. Large sample chamber: Compared to the previous generation it has a large volume of sample room design, sample replacement and accessory adjustment work more easier, more comfortable experience with the instrument.
  9. Built-in optical gate device: built-in programmable optical gate device, designed for easy photo-reactive fluorescent signal instability or a sample survey design, unified sample excitation fluorescence detection rhythm improve the accuracy of analysis.
  10. kinds of measurement accessories include: hole sample cell holder, multi-fluorescent sample holder, 200μL microcentrifuge tube measurement accessories, capillary micro sample measurement accessories, semi-automatic sample injection fluorescence attachment hole sample cell adapter, film and powder samples accessories and sample measurement sheathed sample cell holder and other accessories, greatly expanded the scope of application of the instrument.

Specifications:
Model SP-F98
Detection sensitivity (water Raman peak signal noise ratio)  S/N ≥250 (P-P) or 800(RMS)
Excitation wavelength Bandwidth 1nm/2nm/5nm/10nm/20nm
Emission wavelength Bandwidth 1nm/2nm/5nm/10nm/20nm
Minimum sample volume 0.5ml(using 10mm sample pool)
Wavelength accuracy ±0.4nm
Wavelength repeatability ≤0.2nm
Light source 150W automatic deodorizing xenon lamp (Hamamatsu, Japan)
Optical system Double-grating monochromator automatic wavelength scanning with optical excitation double beam ratio monitoring
Fluorescence Receiver Original photomultiplier (Hamamatsu, Japan)
Excitation wavelength range  200nm~900nm
Emission wavelength range  200nm~900nm
Wavelength scanning speed  10 positions, fastest 60000nm/min
Measurement line ≥0.995
Gain adjustment range  1~17 position optional
Integral Response time  7 position options: 8s ~ 20ms
Data output  Microsoft (R) Excel format, bmp image format
Data transmission  USB2.0 Interface
Light value range  -9999~9999
Peak intensity Repeatability  ≤1.5%
Power source  220V / 50Hz, 110V / 60Hz
Standard energy consumption  200W
Dimensions (mm)  610mm×460mm×365mm
Weight  21kg


 

Aluminum Die Casting Electrical Motor Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.


Aluminum Die Casting Electrical Motor Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.

Aluminum Die Casting Electrical Motor Parts are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Aluminum Die Castings can also be easily plated or finished. Aluminum Die Casting Electrical Motor Parts are dimensionally stable and heat resistant.


We have professionally produced Aluminum Die Casting Electrical Motor Parts nearly 7 years. The parts have a great property of high quality, high precision, reasonable competetive price. our products are very popular.


Aluminum Die Casting Electrical Motor Parts

Castings of Electrical Motor Parts, Aluminum Die Casting of Electric Motor Parts, Die Casting Components, Aluminum Casting of Electrical Motor

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com