Russian Type Glazed Tile Arc Bias Roll Forming Machine (1100)

Model NO.: 1100
Control System: PLC
Trade Type: Professional Manufacturers of Roll Forming Machine
Sales Way: Factory Direct Sale Cbrl
Delivery Time: 30days
Validity Time: Goods for 45 Days
Place of Origin: Hebei China(Mainland)
Use: Roof
Warrenty Time: 12 Months
Trademark: HKY
Transport Package: Nude
Specification: CE, ISO, SGS
Origin: Hebei China(Mainland)
HS Code: 8455221000
Model NO.: 1100
Control System: PLC
Trade Type: Professional Manufacturers of Roll Forming Machine
Sales Way: Factory Direct Sale Cbrl
Delivery Time: 30days
Validity Time: Goods for 45 Days
Place of Origin: Hebei China(Mainland)
Use: Roof
Warrenty Time: 12 Months
Trademark: HKY
Transport Package: Nude
Specification: CE, ISO, SGS
Origin: Hebei China(Mainland)
HS Code: 8455221000
                                         Russian Type Glazed Tile Arc Bias Roll Forming Machine (1100)
Russian Type Glazed Tile Arc Bias Roll Forming Machine (1100)

MAIN TECHNOLOGY PARAMETERS
Manual Un-coiler â—Š Max Capacity: 5000kgs
â—Š Inner diameter of coil: 400-600mm
â—Š Manual with brake
Leveling Device â—Š Ensure the material level and straight
â—Š The width can be adjusted
Main Forming System



 
â—Š Width & Height & Thickness of sheet: According to Drawings
â—Š Material: GI sheet coil or Colored sheet coil
â—Š Motor Power: 5.5 kw forming system
â—Š Roller material:Cr12
â—Š Surface of Roller: Heat treatment HRC58-60
â—Š Measuring accuracy: +/- 0.5 mm/M
â—Š Safety Hood: Cage
â—ŠArch middle plate: 30mm thickness
â—ŠOutput: 8-10 Tons per shift (8 hrs.)
â—ŠThe machine base is assembled and welded by high quality steel
Hydraulic Cutting Device â—Š Cutting way: Tracking (Flying).
â—Š Oil pump station 1set.
â—Š Motor power of Oil pump station: 7.5kw with cooling system
â—Š Forced air cooling device available
â—ŠMaterial of blade: CR12 with heat treatment HRC60-62
Electrical System â—Š Control system: HMI & PLC control panel.
â—Š Power: 440V 50Hz (as per local requirement)
Run-out Table â—Š Frame: 8# steel groove welded
â—Š Roller type.
â—Š Quantity: 1 pc

COMPONENT

Equipment parts: 5T decoiler, forming machine, hydraulic cutter, hydraulic station, electric controlling system, counter.
Material of main equipment:
(1)Roll material: High grade NO. 45 forged steel, plate hard chrome on the surface of roller with thickness 0.05mm.
(2)Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm
(3)Cutter blade: Cr12 mould steel with quenched treatment
Producing flow:
Decoiling the sheet- Sheet guiding- Roll forming- Measure length- Cutting the panel- Panels to the supporter

All technical parameters can be changed, according to user's need.
Products Warranty: 12 months, and we will provide the technical support for the whole life of the equipment.

USAGE AND FEATURE

The feature looks beautiful, elegant and noble. Those are widely used in building the factory, hotel, and mobile house and so on.
This kind of machine has the best quality and the best price. It has accurate measurement and easy operating. We can design and manufacture the special type machine according to the customers' requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.

TERMS
1. Delivery: In stock
2. Package: Export Standard package for container
3. Payment: TT(30% by TT in advance, 70% by TT after you inspect the machine we send )
4. Validity: Good for 30days

REMARKS
1 The machine can according to your requirement to set the color
2 Within in one year if any parts go broken we will send new ones to replace for free
3 If you want to learn more about the product please login our website or contract to us

SERVICE
One years for free, after the warranty period. We will help you repair the machine, you only responsible for the labour and parts, when the machine have some problem

EXPORT MARKET
Russia, India, English, Australia, America, Kazakhstan, Tajikistan, Malaysia, Nigeria, Rumania and Albania etc, more than 50 countries and regions.

ABOUT US
BOTOU HUIKEYUAN ENGINEERING CONTROL CO, . Ltd.

We are a leading manufacture company of roll forming machine, metal process machine, cold forming machine, in the past 25 years, we get lots of experience of the parts & technology, and we improve the quality and technology as the demand of customer day by day.

Now mainly we supply European standard machinery, with Germany technology, Heavy Body, PLC control system, high speed, finish perfect. Also we have a team to make service after selling in abroad of China, we always think the quality is most important and good service is a part of quality.


Contact me:

Lisa Yang (Sales Manager)
BOTOU HUIKEYUAN ENGINEERING CONTROL CO.,LTD
Phone:+86 15612755608
Add: Fuzhuang Development Zone Botou City, Hebei, China

we warmly weclome you to visit our factory!                                          Russian Type Glazed Tile Arc Bias Roll Forming Machine (1100)
Russian Type Glazed Tile Arc Bias Roll Forming Machine (1100)

MAIN TECHNOLOGY PARAMETERS
Manual Un-coiler â—Š Max Capacity: 5000kgs
â—Š Inner diameter of coil: 400-600mm
â—Š Manual with brake
Leveling Device â—Š Ensure the material level and straight
â—Š The width can be adjusted
Main Forming System



 
â—Š Width & Height & Thickness of sheet: According to Drawings
â—Š Material: GI sheet coil or Colored sheet coil
â—Š Motor Power: 5.5 kw forming system
â—Š Roller material:Cr12
â—Š Surface of Roller: Heat treatment HRC58-60
â—Š Measuring accuracy: +/- 0.5 mm/M
â—Š Safety Hood: Cage
â—ŠArch middle plate: 30mm thickness
â—ŠOutput: 8-10 Tons per shift (8 hrs.)
â—ŠThe machine base is assembled and welded by high quality steel
Hydraulic Cutting Device â—Š Cutting way: Tracking (Flying).
â—Š Oil pump station 1set.
â—Š Motor power of Oil pump station: 7.5kw with cooling system
â—Š Forced air cooling device available
â—ŠMaterial of blade: CR12 with heat treatment HRC60-62
Electrical System â—Š Control system: HMI & PLC control panel.
â—Š Power: 440V 50Hz (as per local requirement)
Run-out Table â—Š Frame: 8# steel groove welded
â—Š Roller type.
â—Š Quantity: 1 pc

COMPONENT

Equipment parts: 5T decoiler, forming machine, hydraulic cutter, hydraulic station, electric controlling system, counter.
Material of main equipment:
(1)Roll material: High grade NO. 45 forged steel, plate hard chrome on the surface of roller with thickness 0.05mm.
(2)Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm
(3)Cutter blade: Cr12 mould steel with quenched treatment
Producing flow:
Decoiling the sheet- Sheet guiding- Roll forming- Measure length- Cutting the panel- Panels to the supporter

All technical parameters can be changed, according to user's need.
Products Warranty: 12 months, and we will provide the technical support for the whole life of the equipment.

USAGE AND FEATURE

The feature looks beautiful, elegant and noble. Those are widely used in building the factory, hotel, and mobile house and so on.
This kind of machine has the best quality and the best price. It has accurate measurement and easy operating. We can design and manufacture the special type machine according to the customers' requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.

TERMS
1. Delivery: In stock
2. Package: Export Standard package for container
3. Payment: TT(30% by TT in advance, 70% by TT after you inspect the machine we send )
4. Validity: Good for 30days

REMARKS
1 The machine can according to your requirement to set the color
2 Within in one year if any parts go broken we will send new ones to replace for free
3 If you want to learn more about the product please login our website or contract to us

SERVICE
One years for free, after the warranty period. We will help you repair the machine, you only responsible for the labour and parts, when the machine have some problem

EXPORT MARKET
Russia, India, English, Australia, America, Kazakhstan, Tajikistan, Malaysia, Nigeria, Rumania and Albania etc, more than 50 countries and regions.

ABOUT US
BOTOU HUIKEYUAN ENGINEERING CONTROL CO, . Ltd.

We are a leading manufacture company of roll forming machine, metal process machine, cold forming machine, in the past 25 years, we get lots of experience of the parts & technology, and we improve the quality and technology as the demand of customer day by day.

Now mainly we supply European standard machinery, with Germany technology, Heavy Body, PLC control system, high speed, finish perfect. Also we have a team to make service after selling in abroad of China, we always think the quality is most important and good service is a part of quality.


Contact me:

Lisa Yang (Sales Manager)
BOTOU HUIKEYUAN ENGINEERING CONTROL CO.,LTD
Phone:+86 15612755608
Add: Fuzhuang Development Zone Botou City, Hebei, China

we warmly weclome you to visit our factory!

Electric Hoist

Electric Hoist,Electric Chain Hoist,Chain Hoist

Crane,Grab,Bridge Crane Co., Ltd. , http://www.nscranes.com