Plastic Co-Rotating Twin Screw Extruder

Model NO.: SJP
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Application: Pipe Extrusion
Raw Material: PVC,PE
Voltage: 380V50Hz-3phase
Using: Extruder
Trademark: GPM
Transport Package: PE Film Packaging
Specification: SJP
Origin: Shanghai
HS Code: 8477209000
Model NO.: SJP
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Application: Pipe Extrusion
Raw Material: PVC,PE
Voltage: 380V50Hz-3phase
Using: Extruder
Trademark: GPM
Transport Package: PE Film Packaging
Specification: SJP
Origin: Shanghai
HS Code: 8477209000
Model SJP series twin parallel screw extruder is a kind of special equipment for extruding of PVC powder.With different sorts of molds and auxiliary machines,it can produce all sorts of PVC plastic pipe material,profiled material,board material,sheet material,bar material and granulation.
The screw has applied oil system.Barrel is cooled by special wind cooling system.The control system has applied computer control.According to customer's requirements,most reasonable screw can be highly harmonized.It has firstly introdyced technique of producing screw with varible pitch and depth,so that the material can be more softly sheared and cut.The distribution box is specially designed,pull force bearing is fully imported,and the drive life span can be prolonged.It can bear large extruding pressure.The electrical system has mainly applied imported parts,it has multiple alarm system,and there are few problems which can be easily eliminated.The cooling system has applied special design,heat emission area is enlarged,the cooling is rapid  ,temperature control tolerance can be±1ºC.
Use for pipe extrusion 
Model SJP75/28 SJP93/28 SJP114/28 SJP135/28
Motor power(kw) 37 75 110 160
Screw diameter(mm) 75 93 114 135
L/D Ratio 28:1 28:1 28:1 28:1
Max.output(kg/h) 350 460 680 1100
Weight(kg) 4100 4700 6500 8400
Model SJP series twin parallel screw extruder is a kind of special equipment for extruding of PVC powder.With different sorts of molds and auxiliary machines,it can produce all sorts of PVC plastic pipe material,profiled material,board material,sheet material,bar material and granulation.
The screw has applied oil system.Barrel is cooled by special wind cooling system.The control system has applied computer control.According to customer's requirements,most reasonable screw can be highly harmonized.It has firstly introdyced technique of producing screw with varible pitch and depth,so that the material can be more softly sheared and cut.The distribution box is specially designed,pull force bearing is fully imported,and the drive life span can be prolonged.It can bear large extruding pressure.The electrical system has mainly applied imported parts,it has multiple alarm system,and there are few problems which can be easily eliminated.The cooling system has applied special design,heat emission area is enlarged,the cooling is rapid  ,temperature control tolerance can be±1ºC.
Use for pipe extrusion 
Model SJP75/28 SJP93/28 SJP114/28 SJP135/28
Motor power(kw) 37 75 110 160
Screw diameter(mm) 75 93 114 135
L/D Ratio 28:1 28:1 28:1 28:1
Max.output(kg/h) 350 460 680 1100
Weight(kg) 4100 4700 6500 8400

5Ton loader is widely used in highway, railway, construction, port, mine and other construction works of earth and stone Construction Machinery, which is mainly used for loading and unloading soil, gravel, lime, coal and other bulk materials,it can also make light shovel digging operation of  ore, hard soil, etc. with the advantages of fast operating speed, high efficiency, good mobility and easy operation.

5T Wheel Loader

5T Wheel Loader,5T Front End Wheel Loader,5T Mini Wheel Loader,Construction Machinery 5T

Shandong Shantui Construction Machinery Import & Export Co.,Ltd. , https://www.bulldozers.pl