Plastic Chemical Lubricant Bottle Making Blow Moudling Machine
Maximum
Load:1000-100,1000kg
This novel VT
type Electric Wire Rope Hoist is made with 13 patented technologies.
As contrasted
with conventional designs, the VT type electric wire rope hoist is a
revolutionary new generation product. It houses many brilliant brilliant
attributes, such as a superb performance, short headroom, accurate positioning,
great operating comfort, and maximum security and reliability, all encompassed
in a compact design. It is a multi-functioning machine that has revolutionized
the way the wire rope hoist is designed and manufactured.
With a
hoisting capacity ranging from 800kg to 250,000kg,the lift can take the load up
to a maximum height of 103.6m.Plenty of models, Configurations and
specifications exist for the hoist, from which customers are sure to find the
perfect match.
Advantages
Ÿ Short headroom allows large vertical
operating space for the wire rope hoist. Size-C hoist design leaves more
vertical space for lifting. Such attribute can be hardly found in any of its
contemporaries. The hoisting hook can reach much closer to the side walls.
Minimum side clearance effectively enlarges the work area.
Ÿ Dynadrive is designed for stable
running and fast positioning. It can minimize the load sway and improve
operating safety and comfort.
Ÿ Each component of our electric wire
rope hoist is rigorously inspected and tested by our qualified engineers to
ensure the safety and working efficiency the final product.
Ÿ A high load factor 60% can be achieved
of the motor, whose cooling performance is 30% higher than other similar
products. High performance safety brake has a use life exceeding 1 million
cycles. The brake can adjust itself according to the degree of wear. This
design requires limited maintenance.
Ÿ Large-diameter cable reel is designed
for extended use life and small fleet angle. During lifting, the rope only
deviates a little to the side of the drum, which ensures vertical lifting,
accurate positioning, and maximum operating convenience.
Ÿ Given customer needs for performance
and ease of operation. ergonomic features are added to the electrical wire rope
hoist to increase operating safety and comfort. Double-layer protective polypropylene
coating of the pendant control station enables an IP65 rating.
Plenty of
options exist, in order to accommodate various customer needs.
Ÿ Non standard rail width
Ÿ Special rail gauge
Ÿ Radio remote control
Ÿ Traveling limit switch
Ÿ Derailment catches on double girder
trolley
Ÿ Phase protection relays
Ÿ Hoist travel monitoring device
Ÿ Sound and light alarm
Ÿ Explosion proof and/or spark proof
hoist
Ÿ Load indication device
Ÿ Motors thermal protection
Ÿ Stainless steel hoist electrical
cubicle:IP55 or IP65
Ÿ Class H motors
Ÿ Secondary brake
Ÿ Variable speed lifting
Ÿ CSA electric control
For any other special requirements,
please contact us.
Clean Room Crane,Cleanroom Cranes Eurocrane (China) Co., Ltd. , https://www.craneparts.pl
Type TP5D-75
Extrusion Blow Molding Machine
Double Station Single Head
*Volume 1L to 5L
*Net Weight 100-280g
*Output 250-380 pcs/hr.
Standard Features
1. Double station blow molding machine with 75mm grooved extruder.
2. Single, double triple and quadruple head capacity.
3. Reliable two-plate axes mould locking.
4. Processing HDPE, LDPE, PP capacity.
5. Multi-blow extrusion heads with quick color change.
6. In machine automatic deflashing and cooling station.
7. Nitrided screw and berrel.
8. Adopt hydraulic accumulators.
9. Low power consumption.
10. Up blowing system.
11. Machine control by microprocessor B&R
12. SERVO valve for hydraulic and 100/300 point Parison thickness.
13. Gripper for bottle take out inside machine.
14. Carriage fast movement by Prop Valve.
15. Safety ladder and rail protection.
Die head
This machine when using single die head, can make 2L to 5L bottles,
However, the die head can also be changed to double die head, triple die head and 4 head to be able to make other smaller size bottles.
Single die head  (2~5L)
Double die head (0~2L)
Triple die head (0~750ml)
Four die head (0~500ml)
Changing the die head system takes around 1.5~3h, this also included heating time.
Configuration
Main Part
Brand
Servo oil pump
REXROTH from Germany
Â
High pressure oil pump
YUKEN from Japan
Pneumatic
FESTO from Germany
or
SMC from Japan
Proportional valves
REXROTH from Germany
Directional valves
YUKEN from Japan
Control system
B&R From Austria
Frequency converter
ABB From Switzerland
Contactor
SCHNEIDER From Franch
Linear roller bearings
HIWIN from TAIWAN
Motor
SIEMENS from Germany
Gearbox
SEW from Germany
Electronic ruler
Novotechnik from Germany
Â