High Precision Aluminum Extrusion Tooling Die Mold
Conveyor idler is the important part of all kinds of belt conveyor, it support the conveyor belt and holds the cargos. Such as Trough Idler, Return Idler, Impact Idler, which meet CEMA, ISO or any other standards. Conveyor idler designs are composed of more than one roller, where various parts of the idler connect to the conveyor belt at different points to keep the belt properly routed and operating well. These designs can also include metal racks for stability.
As a useful part of many industrial systems, conveyor idlers come in many different forms. Some common ones are inline idlers, inset or offset idlers, and return idlers. Inline, inset, and offset varieties are built in very specific ways to accommodate the belt according to optimal factors. Return idlers often deal with the undercarriage of the belt, which moves in the reverse direction. They can help to control aspects of belt return that contributes to the general function of the conveyor belt, such as the width or tension between the top belt and the return.
Conveyor idlers are used to take up extra belt length and provide adjustment for tensioning belt drives. Idler can be valuable belt drive components. bend Idler can alter belt paths, make the belt clear obstructions, or apply belt pre-tension. Idlers may remain in a fixed location, or may be adjustable to allow belt pre-tensioning and take up. Idlers may be applied to either the inside or backside of belts. Backside idlers are generally flat.
Structure of idler roller:
The internal components of idler rolls are essentially the same
The sealing arrangement protects the bearing from dust and moisture, as well as other environmental contaminants. In addition, the quality of idlers also varies depending on the quality of the individual components and of the manufacturing process. In addition to the idler roll itself, an idler set is supported in position by an idler bracket or base frame. These bases and brackets locate the individual idler rolls relative to each other and provide the necessary 'trough' angle.
1.The outer shells of idler rolls are generally manufactured from 89, 102, 108, 114, 127, 138, 152 and 178 mm tubing.
2.The outer shells are generally closed off with an end cap of varying design.
3. The end caps are normally designed to house the anti-friction bearings (3)
4.and bearing dust seals
5. The anti-friction bearings support the non-rotating idler shaft
The idler shaft has special machined ends to positively location the idler within the base frame support bracket. and every one of our idlers passes through a comprehensive ISO 9001 quality.
Bearing Size
Most manufacturers use 6200 series deep groove ball bearings when constructing B series idlers, and either 6300 series ball bearings or regreasable tapered roller bearings when constructing C series idlers.
Special attention:
For our purposes, most CEMA idler manufacturers publish life expectations for 30,000 hours L10 life at 500 RPM.
Diameter of roller mm
Length of roller(tube)mm
Bearing
89
190.200.230.240.280.305.315.375.380.455.465.600.750.950.1150
6204
108
190.200.240.250.305.315.375.380.455.465.525.600.700.750.800.950.1150.1400
6205
133
305.350.375.380.455.465.525.530.600.700.790.800.950.1150.1400.1600
6305
159
375.380.455.465.525.630.600.640.670.700.750.790.800.900.950.1050.1120.1150.1400.1600
6306 6308
193.7
600.640.750.800.900.950.1050.1120
217
600.640.1050.1120
Conveyor Idler,Conveyor Idler Roller,Belt Conveyor Idler,Conveyor Carrier Idler Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
DAYTON, MISUMI, LANE, MDL, FIBRO and DME etc standard punch and special mold parts manufacturer, quality raw material, precision grinding with polished surface, long service life
Product details:
Â
PART NUMBER
HSS fitting die bush
MATERIAL
HSS/SKH-51/SKH-9, CARBIDE/H40S/KG7/V40, ASP/23/30/60, SKD11/HWS/1.2379, SKD61/1.2343/1.2344, WS/SUJ2/1.2516/1.2210
HARDNESS
STANDARD OR AS PER REQUEST
TOLERANCE
+-0.002
SURFACE TREATMENT
TIN/TICN/ALCRN/CRN/ALTIN/TIC-TIN/TIALN/DLC
Quality-Life of the factory. No quality no talk!
1. quality raw material and what customers required is surely used
2. experienced workers follow drawings critically, each dimensions and tolerances are highly valued and met, each process should check quality before passing to next step
3.QCs check all items carefully and thoroughly before shipment
4. any diviations of drawings check with customers before shipment
Price- save cost with us!
1. factory offer directly, save you at least 30% of the cost
2. large qty special price will offered
3. same quality, better price, same price, better quality
Delivery-urgent orders no extra cost
1. generally 5-7 working days
2. urgent items 1-3 working days and no extra cost
Service-Quality and service come first is our company policy and never changing culture
Reliability and guarantee-your business is safe with us
We are not only making business with you, but making friends also! If we fail to meet your quality requirement, fast free replacement will be offered or refund!!! With us, your business is secure! Please be free of worry working with us!!!
Production flow:
Contact us now!!!
Â
