PP Melt Blown Filter Cartridge / RO Parts for Liquid Filtration

  • Material: PP
  • Cartridge Filter: Non-Woven Polyester Fiber
  • Type: Melt Blown Filter Cartridge
  • Filtration Grade: PRE Filter
  • Filter Bag Environment: Room Temperature
  • Filter Media: Polypropylene
  • Micron Rating Nominal: 1 Micron \5 Micron\10micron\20micron\etc
  • Od: 4.5inches
  • Temperature Range: 4.4degree to 62.8degree
  • Max.Pressure Drop: 46.4psi
  • Trademark: OEM
  • Specification: OEM
  • HS Code: 84219990
  • Medium Material: Melt Blown
  • Filter Bag Filter: The Filter Type
  • Usage: Liquid Filter, Water Filter
  • Filter Bag Sectional Shape: Round Bag
  • Cartridge Installation: Vertical Lifting
  • Size: OEM
  • Length: 5inches\10 Inches\20inches\30inches\40inches
  • ID: 28mm
  • Max.Operating Temperature: 63degree
  • Max.Flow: 2-8gpm
  • Transport Package: Carton
  • Origin: Shanghai
PP melt blown water filter cartridge
Made from 100% pure Polypropylene resin, design for the reduction of dirt, rust, and unforeseen particles. Progressively loose structure from inside to outside enhance the cartridge performance.

PP Melt Blown Filter Cartridge / RO Parts for Liquid Filtration
 
Feature:
l  Thermally self-bonded micro-fiber construction
l  Designed for purification and good for food contact
l  Graded pore structure enhances dirt holding capacity
l  No fiber releasing and media migration
l  Wide chemical compatibility
l  Spun fibers from a true gradient density from outer to inner surfaces
l  High contaminant holding capacity
 
Application:
l  Pre-treatment of drinking water system
l  Oil removal industry
l  Food and beverages
l  Photographic industry
l  Pharmacy industry
l  Pre-treatment of industrial DI&RO system
l  Low viscosity fluids
 
Specification:
Micron Rating(μm) 0.5-100
Dimensions Length(mm) O.D(mm) I.D(mm)
Optional Optional Optional
Materials Media Core End Cap Gasket/O-Ring
Polypropylene Polypropylene Polypropylene Silicon
Temperature Range 4.4ºC to 62.8 ºC
Max.pressure drop 20ºC 46.4psi(3.2kg/cm2)
Maximum flow 2-8 GPM(depending on micron rating)
 
 
Style surface:

PP Melt Blown Filter Cartridge / RO Parts for Liquid Filtration

 
Packaging & Shipping:
Packaging:
1.      Products are packed by shrink film. It can reduce abrasion when transport.
2.      Products are packed by high quality carton, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks.
Delivery time:
1.      If this kind of products is in stock, the product will be sent for you 1-7days after payment.
2.      If this kind of products is not in stock, the products will take about 7-25 days to produce.
Shipping:
Maritime; Railway; Air (DHL/UPS/TNT/FEDEX)
 
Contacts:
If you have interest in any kind of our product, warmly welcome your inquiry. We will supply our best quality products and service for you.
 
Mobile: +8613818972204
Tel:  +86-021-57600791*816
Fax:  +86-021-57600792

Linear Stepper Motor

Linear Stepper Motor,3D Printer Motor,Stepping Motor,Externally Driven Stepper Motor

Changzhou Hebe Interantional Trade Co., Ltd , https://www.hebe-motion.com