Summer explosion-proof tire God Talmar retarder

Summer how can we not install Tellabs Ma retarder? Summer traffic on the highway because the truck tire rubber left behind a piece of skin is very common. But why is the proportion of vehicle punctures on the high-speed roads in the summer significantly increasing?
Tellomar retarder is frequently favored Tellomar retarder is frequently favored

When the vehicle is driving on the highway, due to the acceleration of the vehicle speed, the friction between the tire and the road surface becomes worse, the load increases, the frequency of the tire flexing increases, the tire temperature and the internal pressure increase, and the aging of the curtain fabric and the fatigue of the cord can be easily accelerated. The high temperature of the road makes the tire temperature and internal pressure rise further. Not only that, when the vehicle is performing service braking, a large amount of kinetic energy is converted into braking heat according to the theory of energy conversion. Due to the poor heat dissipation performance of the truck brakes, heat is transferred to the tires, which further deteriorates the aging of the tire cord and the fatigue of the cords. , greatly increased the risk of puncture.

Tyrema retarder is a non-friction auxiliary electromagnetic brake, which slows down the vehicle through the deceleration of the transmission system. The application of Tellomar retarder can significantly reduce the use of vehicle service brakes, which greatly reduces the heat generated by the friction between the brake shoes and the brake drum, significantly reduces the amount of heat transferred to the tires, and reduces the risk of vehicle tire bursts. . Because of this, PetroChina's oil and gas transportation vehicles installed almost Tellomar retarder, which greatly reduced the probability of tire bursting, improved operational safety and efficiency, and was highly praised by the company.

NINGBO RUICAN MACHINERY COMPANY can supply the Lock Parts according to the clients' technical drawings or samples,and offer different surface treatments,such as plating zinc,powder coating,electrophoresis,mirror polishing and so on.


Each type of lock is built differently, but let`s take a look at the anatomy of a typical door lock usually used in homes or light commercial buildings. The main parts of a door lock are the cylinder, bolt, box and strike plate.

It`s useful for any DIY-er to know how things around the home operate. Understanding the different parts that work together to make a door handle and lock work, can help you fix minor problems on your own.


NINGBO RUICAN MACHINERY COMPANY is confident to offer the good lock parts to you.

Lock Parts

Lock Parts,Lock Rod Parts,Door Lock Parts,Security Lock Parts

Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com