Hook-up garbage truck hydraulic direction mechanism maintenance and reducing carbon deposition method
In the city of life, hook-and-tube garbage trucks are responsible for the transport of urban garbage trucks. In daily life, there are two common types. One is a compression garbage truck that collects garbage along the street, and the other is a hook-and-arm garbage truck. When the hook-and-tube garbage truck is used for loading and unloading garbage, the hydraulic system needs frequent operation. At the same time, the formation of carbon deposits will affect the efficiency of garbage trucks. This time, we will use the most common maintenance methods for hydraulic maintenance and reducing the carbon deposition method of the hook arm garbage truck. Correct maintenance method of hydraulic direction mechanism of hook-type garbage truck 1. The owner of the hook-up garbage truck should regularly check whether the hydraulic system joint has oil leakage. The hydraulic oil pipe should also avoid the friction of other parts to prevent it from damaging the intake air. 2. When the hook-arm garbage truck turns or turns around, don't kill the steering wheel. Leave it a bit to ensure that the hydraulic steering system is in normal working condition. 3, the owner of the hook arm garbage truck should regularly check the steering hydraulic oil, if less must be added in time, but also to clean the hydraulic oil cup and filter core, this can prevent the hydraulic oil dirty or deterioration. In general, we recommend replacing the hydraulic oil on a journey of 30,000 kilometers. Several methods for reducing carbon deposition in hook -and-eye garbage trucks 1. The hook-arm garbage truck should not be idling for a long time while driving, because the time it takes for a long idling drive to get over the normal temperature will be longer, and the evaporation rate of diesel oil after it is sprayed on the back of the valve is slow. Carbon deposition will also happen. 2. Hook arm garbage trucks should choose clean oil when refueling, which will also reduce the formation of carbon deposits. 3, the hook arm garbage truck should also pay attention to the timing when the flame is turned off, do not turn off the car once stopped, you can then idle a few minutes and then turn off. This will also reduce the formation of carbon deposits.
Working principle:
Horizontal Ribbon Blender consist of U-shaped barrel, agitator, speed reducer and electric motor .Untwist double ribbon are swirled with the main shaft in the U shape barrel. The outer ribbon push the material from the two ends to the center of the barrel, inner ribbon push the material from center to the two ends. Thus to achieve material convention
Under the driven of motor, the double ribbon agitator mix the material quickly. This ribbon blender is characterized by high mixing effect, large productivity, and a very low failure rate. Since it is a batch type mixer, customer should choose the model according to the output per batch.
The discharging port is set in the bottom center, with the help of the outer ribbon,the material can be discharged completely, and no dead zone.
We also provide suitable feeding machine for the ribbon blender,such as Screw Conveyor, Vacuum Conveyor,Bucket Elevator,flexible screw conveyor etc.
Application:
The horizontal ribbon blender is widely used in chemical, pharmaceuticals, food, and construction line. It can be used to mix powder with powder, powder with liquid, and powder with granule.
Ribbon Blender Ribbon Blender,Ribbon Mixer,Industrial Blender,Ribbon Blender Mixer XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl
